Easy Mount 5L

Dilute Easy-Mount with distilled water in a ratio of 1: 3 for easy surfaces with little stress (hoods, side shields) and 1: 2 for difficult surfaces with a lot of stress (bumpers).

First clean the surface thoroughly with our CC cleaner, after which the Easy Mount must be moistened well. After this, moisten the surface of the paint protection film well with Easy-Mount to reduce the static of the film when the liner is removed. While removing the liner moisten the adhesive layer with Easy-Mount.
Make sure to use enough Easy-Mount because we work with transparent foils and therefore every particle of dust, etc. can be visible.

Now moisten the surface to be glued and cleaned with Easy-Mount and stretch the paint protection film on the surface? Before squeegeeing, moisten the foil with water, so that the squeegee glides more easily over the foil? After this, remove the Easy-Mount from under the foil and fix the foil.

Easy Mount makes the application easier because it activates the adhesion.
In most cases, in 15 minutes of drying time can it be cut cleanly.